-
Hello,
Pin 33 works with PWM. Pin 32 and pin 15 do not. It's just either on or off. I'm using a L293 motor controller and if I switch the pins for left and right motors, the other motor exhibits th…
-
### Description
Build and run verilator testbench with hello_world image
```
bazel-bin/hw/build.verilator_real/sim-verilator/Vchip_sim_tb \
--meminit=rom,bazel-out/k8-fastbuild-ST-2cc462681f62/…
-
https://wiki.sipeed.com/soft/maixpy/zh/api_reference/Maix/gpio.html
-
Im guessing the nucleo board stm32f411RE is a bit different with pinouts, and I would have to configure more than just a header file in boards/ , right?
I would have to modify stm32/common/gpio_f24…
-
[penplotter.txt](https://github.com/user-attachments/files/16570890/penplotter.txt)
This issue will automatically convert a Grbl_Esp32 machine definition file to FluidNC YAML format.
Change YOUR…
-
Our LEDs work as expected (green on, blue flashing) with the following settings:
gpio_bank_high RXA
gpio_bank_low TXA
When we switch them (to provide the T/R signal polarity required by Wallops t…
-
Hi everybody
I tried to use ST7920 and stm32f030 via 3 wire software spi.
my code is:
```
//----------------------------------------------------------
uint8_t u8g2_gpio_and_delay_stm32(U8X8_UNUSE…
-
* Add new GPIO pin N/A. This 'pin' will be used in device driver instances pin configurations in case some pins are not defined for different classes of devices.
* For example USART device requires 5…
-
This ia an amazing project!
But I found that DOWN KEY(GPIO0) doesn't work, I tried other GPIOS like GPIO13 23 35,it still don't work,how tho slove this problem?
I found the key setting in sdkconfig…
-
```
{
/* Waste of RAM, switch to palSetPadMode() and palSetPort() */
static OutputPin TleCs0;
TleCs0.initPin("TLE9104 CS0", Gpio::A15);
TleCs0.setValue(1);
}
```
looks like …