-
Hallo Andig,
ich habe heute das Update 0.9.2 eingespielt. Dabei ist mir aufgefallen das bei 2 meiner Thermostate ein Ausrufezeichen in der Home.app angezeigt werden. Der Hinweis erscheint mit der M…
-
### Problem description
I have connected this thermostat to Home Assistant using Zigbee Home Automation and the SkyConnect dongle. The basic features work: the current temperature, set temperature, o…
-
It's currently possible to send `NaN` in console, as per below;
```
SET_HEATER_TEMPERATURE HEATER=extruder TARGET=NaN
```
In this case, Klipper starts heating - and will error once it exceeds …
-
http://processheatingservices.com/water-heating-time-calculator/
-
RECS 2020 has "GARGHEAT" indicating whether a garage is heated. By count, 10% of the responses with a garage is a heated garage, which is non-trivial and should be considered for future integration in…
-
## What is the feature?
### Description
When airing out it would be nice to have the window/door sensor turn off the heating. This is currently supported however when closing the window again th…
-
Finally I installed the system, half year later :)
Using Waveshare POE and running as HA add-on.
My Rehau setup is with 3 floors, each one with its own rehau panel (valves controller), the main p…
zbuh updated
7 months ago
-
@xmiklos @dazzyp @oischinger I have the same issue.
If the status of "climate.vicare_heating" (ViCare Heating) is showing "Idle (Auto)" I get the error below if trying to setTemperature.
If the …
-
Ability to be able to boost the heating for by X degrees for the next Y time.
E.g. On my living room card (current temp 18 degrees) I'd like to be able to boost the heating in that room for the nex…
-
The user-defined integration “luxtronik2” implements the property “is_aux_heat” or uses the additional heating methods in a subclass of ClimateEntity.
In addition the following warnings are listed …