-
Tested RPi B revision 1 - works, but is not listed in table yet (this is one of the oldest RPi models). There's an internal OTG USB hub managed by the SoC, with three ports:
```
# uhubctl
Current…
-
## Expected Behavior
Nothing works after updating... Just kidding.. A smooth stream of win and happiness.
## Current Behavior
A stream that plays for a while, but eventually g…
-
### Hardware:
Board: OLIMEX ESP32-EVB
Core Installation/update date: esp32-idf / esp32-arduino 9.03.2018 latest master branch
IDE name: Arduino 1.8.4
Flash Frequency: 40Mhz
Uplo…
elotn updated
5 years ago
-
As stated, vectors like SubMaterial and HoloBodygroups are one off from what they should be to show correctly on my dedicated server. For example, if I spawn a holo E2 for a prop whose Body group shou…
-
ShareonlineBiz is sometimes "Premium: NO" - but if i enter the Password again and submit - "Premium: Yes" and can download in HighSpeed ...
Is this when all traffic is used or only a bug in this Plug…
-
Just adding my own new [OctoPrint-USBControl](https://github.com/OutsourcedGuru/OctoPrint-USBControl) plugin now uses your executable.
-
Hi
Tested 3 hubs now, all from your list of "working". I plugged in a phone on usb and checked charging.
Amazonbasics 4-port USB 3.0 Hub
https://www.amazon.com/gp/product/B00DQFGH80/ref=ppx_…
-
I've installed ESP8266 core 2.4.0 for Arduino 1.8.5 (Windows 7 SP1 64-bit) and immediately encountered problems when comminucating with one of my sensors (MH-Z19) which is utilized through `SoftwareSe…
-
Hello,
we have a board based on SAMA5D27-SOM1-EK, (SAMA5D27-SOM1 + our baseboard) and we have SD card slot connected to MMC1 and eMMC on MMC0 interface. We have aplan to use eMMC on our final system…
-
I used the new bootcode.bin to boot my rpi 2 B version 1.1 from USB. i.e. SD card has a fat partition with bootcode.bin and the USB stick has a fat partition with the rest of the boot files and an ext…
Olma2 updated
5 years ago