-
-
Hi Matthias,
this is more a question, not an issue - hopefully. The rain counter of my sensor is wrong in LoRaWAN.
The sensor 6in1 sends two different packets every 12s:
- one has temp/hum info…
-
Hello guys, I noticed some of the decoders include the acurite atlas, which is one of the first decoders on the list, but my setup is not able to decode anything so far, I just see this message:
`R…
-
### Describe the Bug
Generic Binary Sensor Added in RING Not Creating State Entity
### Steps to Reproduce
Added a Zooz ZSE41 Contact Sensor to RING
### Expected Behavior
Expecting to see the ope…
-
I moved to using main rtl_433 build to pick up ecowitt soil moisture sensor as the switchdoclabs build does not support it. In doing so, I had to change to use Cotech-367959 to read FT020T. After doin…
-
## Version of the custom_component
Latest
## Configuration
```text
Running:
Home Assistant 2022.8.3
Supervisor 2022.07.0
Frontend 20220802.0 - latest
Ecowitt Device GW1000_V1.7.5 - lates…
-
Is it possible to include functionality of HARD thermostat - where no MQTT(or similar) server is available or there are no commands received.
Of course this mode will require temp sensor connected.
…
-
How to add lumi.curtain.hmcn02 (Xiaomi BLE Curtain Driver E1)
-
### The problem
Several times per hour, the ESP32 device (in logs 192.168.10.26) loses connection with the API and then reconnects. Unfortunately this affects messages over the loudspeaker (dfplayer …
-
### What happened?
I added a new TuYa WSD500A to my Zigbee2MQTT system.
The temperature sensor was integrated correctly, but no values are received from it.
In addition, this message appears in th…