-
Hi guys, I've been experimenting with Nextion display and Marlin for some time now, and have already tested the @apballard and @MagoKimbra versions and both works just fine. However since I learned ab…
-
**Describe the problem you have/What new integration you would like**
For Nextion displays: it is possible to change a picture element to display a different image
For example in the Nextion d…
-
Wondering if there's an easy way to access the internal array once values are stored?
I'm using a nextion display calculating temperature over time - stored on ESP's flash over a month period. For th…
-
Hi Jonathan,
I have a question about the frequency resolution being reported in nextion.cpp
```
::sprintf(command, "t30.txt=\"%3.4f\"",m_fl_rxFrequency); // RX freq
sendCommand(command);
…
-
It's not really issue, but some like question. Does ASCII buffer really needs to be for 96 chars? I'm modifyng marlin 1.1.8 for nextion display support but i'm reaching about 88% SRAM usage. So i'm lo…
-
I have Wemos D1 R1 and Nextion NX3224T028_011 panel
I flashed firmware for nextion using sdcard successfully.
Flashed D1 using Arduino - selected WeMos D1 R1 as board also successfully.
Connected b…
-
yes
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
raspberry pi 3b+
**ESP (ESP32/ESP8266, Board/Sonoff):**
**Affected component:**
**Description of problem:**
…
-
### Question
Is it possible to adjust the backlight level when the MQTT server is unavailable?
### Back story
I live in CA and am effected by the fire preventive power shutoffs. When this is s…
-
Ok time to prepare 2.0
What is the plan ?
It will definitly use ASync WebServer to have better both way communication between server and client and avoid some unecessary poiling which can dist…
-
Are you able to share the nextion editor configuration?