-
I try to install this drivers for TP-LINK T2UH dongle.
_make, make install_ - no errors.
Created files
_/lib/modules/4.8.0-kali2-686-pae/kernel/drivers/net/wireless/mt7610u_sta.ko_
_/etc/Wire…
-
**Describe the bug**
QZ app can discover and connect to my treadmill, but the treadmill does not respond to the app. I'm aware that ESLinker is not fully supported. I hope I can provide information…
-
**Describe the bug**
If a WiFI source of NMEA data becomes available after OCPN is started or the input stream is enabled, OCPN does not start receiving it.
**To Reproduce**
Steps to reproduce th…
-
Hello @RoboDurden! I have 3 hoverboards that I would like to reverse engineer as I have several project ideas in mind and I am too cheap to buy BLDC driver boards for them when they already come with…
-
**Describe the bug**
in settings fan speed an voltage is enabled but section and values are not shown and nothing from:
`journalctl --since="`date '+%Y-%m-%d %H:%M'`" -f | grep sensory-perceptio…
lemrm updated
2 years ago
-
```
What steps will reproduce the problem?
1. Connect a 3D camera that uses side-by-side technology.
2. Configure min. Battery Voltage (V) in the Config Tool.
3. Use FPV glasses that support 3D (SBS) …
-
```
What steps will reproduce the problem?
1. Connect a 3D camera that uses side-by-side technology.
2. Configure min. Battery Voltage (V) in the Config Tool.
3. Use FPV glasses that support 3D (SBS) …
-
```
What steps will reproduce the problem?
1. Connect a 3D camera that uses side-by-side technology.
2. Configure min. Battery Voltage (V) in the Config Tool.
3. Use FPV glasses that support 3D (SBS) …
-
```
What steps will reproduce the problem?
1. Connect a 3D camera that uses side-by-side technology.
2. Configure min. Battery Voltage (V) in the Config Tool.
3. Use FPV glasses that support 3D (SBS) …
-
```
What steps will reproduce the problem?
1. Connect a 3D camera that uses side-by-side technology.
2. Configure min. Battery Voltage (V) in the Config Tool.
3. Use FPV glasses that support 3D (SBS) …