-
### The problem
NOTE:
**I just tested this in 1.21.0.dev0 and everything appears to be working again. I don't know exactly what changed between the 2 versions but clearly someone has submitted a P…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
The firmware doesn't support full functionality with new GD chips. I went ahead and fl…
-
tl;dr
I'm offering myself to cleanup/tidyup the code, coherently renaming some labels.
---
I'm developing [a custom module](https://github.com/KevinOConnor/klipper/issues/2007) and I find a bit…
mfp20 updated
2 years ago
-
I'm working with a WS2812 strip and have tested it using the RGBCallibrate example program and the red LEDs are orange in FastLED V3.0.0.
They appear fine when tested with the Neopixel library. I th…
-
Hi guys, I got an issue with BL touch v3.1:
after cancel the print job, and then exectue the QGL, bltouch push-pin won't go down and case the hotend crash to bed.
and I can not find any error or …
-
Hi,
Firstly thanks for creating this great project, ive been using klipper for my mishmash corexy (without heated bed) for the last few months and its been great.
I recently decided to finish i…
-
I have just installed klipper branch 20180220a on my Anycubic kossel delta with trigorilla board + RPi3b and a few lines after the print has started one of the stepper motors turns off (i can move it …
-
First of all, Dankeschön, for all the hard work
Running on Linux Mint 20.2 (basically a Ubuntu 21.04)
Board is a quite old Intel DQ61-EP
lm-sensors is already the newest version (1:3.6.0-2ubunt…
-
I've built this (sudo dkms install cm4io-fan/0.1.0-2) on 32bit raspi and it seems to work well except for 1 issue. After it has been cooling and ramping down to slower and slower speeds, it kicks back…
-
Biqu has just released the SKR Pro:
https://www.aliexpress.com/item/33042699158.html
It appears to be *very* potent board, with expansive expandability, 6 stepper sockets, and an STM32F407 MCU.
I…