-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
while homing Z axis the printer "sets" the X and Y value to the correct for z safe homing (mi…
-
I got these errors when compiling the esp3d.ino using
Arduino IDE 2.0 on MacOS 13.6
NodeMCU v1.0.0 with 4mb
Core Esp8266 3.1.2 and 2.5.2
Esp3D 2.1.2 and 3.0
Target Repetier and Marlin firmware
…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I was updating from Marlin 2.0.9.3 on my Trigorilla_Pro board (the printer is Anycubic …
-
If do a refresh on Machine settings (e.g : repetier or marlin) the command to get setting is sent
but at this time the websocket is not yet established so the answer never come to webUI
additionally…
-
### Application Version
5.3.0
### Platform
Windows 10
### Printer
Flying Bear 5 (Klipper)
### Reproduction steps
1. Create any cylinder. The optimal diameter is 40 mm.
2. Make a Cura 5.3.0 sli…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I noticed on a new build that my prints suddenly were squashed by about 4mm once I had enable…
-
Hi guys!
I'm trying to attach the MKS TFT32 touch display to the SKR 1.4 Turbo via the TFT module, but without success so far.
The touch display startup and run correctly but when I try to send so…
-
Issueing a M109 T1 S205 or M104 T1 S205 (etc)
fails with error
Malformed command '_GCODE_WAIT_WRAPPER HEATER={'pressure_advance': 0.0, 'target': 0.0, 'power': 0.0, 'can_extrude': True, 'smooth_tim…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
When `PID_PARAMS_PER_HOTEND` is disabled, the PID constants that are supposed to be sha…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
I have a custom-built core XY printer and a custom board(with microcontroller SAM3X8E a…