-
Hello! I've try to porting to the Allwinner F1C200s SoC device.
I've successfully compile kernel module and load it on target system, but i can't see `espsta0` interface in `ifconfig -a` output.
K…
-
## Platform
I’m using:
* gokrazy/rpi3b
* gokrazy/rpi3b+
* gokrazy/rpi4b
* ... and also gokrazy/rpi400
## Observed behavior
The Raspberry Pi 400 seems to mostly work. Everything except w…
-
So I am searching around to find the best way to get OctoPrint running on my m2 zero, and I was wondering if you could help me narrow down my options. These are the options I have come up with so far …
-
Crashes when I try to start wspr on a raspberry pi 1. The only way to recover is unplugg the device and plug it back in.
-
I have some issue with this module. When I ring the bell, there is reaction on my magic mirror. I have put this top_left and other module will move below, but the ring module has no video and only bla…
-
Sometimes, after a while streams just die. WebRTC shows nothing, mjpg streams throws a server error.
This happens if the camera is left running for a while, sometimes an hour, sometimes a day.
Any…
-
**Is this the right place for my bug report?**
This repository contains the GPU firmware used on the Raspberry Pi. This software is the closed source part of the Raspberry Pi system, it includes boot…
-
**Is this the right place for my bug report?**
This repository contains the Linux kernel used on the Raspberry Pi. If you believe that the issue you are seeing is kernel-related, this is the right pl…
-
### Preliminary Docs
I confirm that I have read the [CONTRIBUTING](https://github.com/ccrisan/motioneyeos/blob/master/.github/CONTRIBUTING.md) guide before opening this issue.
I confirm that I h…
-
### Describe the problem
It seems that the only way I can get the Raspberry Pi Zero W to be recognized in my 2023 Model Y is to go to the Web UI and manually click "Connect drives to host"
The las…