-
I did some testing with fldigi, and wsjtx both on latest firmware from yesterday. This issue may be present or not in earlier firmwares.
Issue is that when producing a tone to tune from a PC over t…
Jmelz updated
6 years ago
-
Adam suggested that I just use raw USB transport, rather than re-framing over COBS.
I probably want a few "transport" options, such as some kind of embedded-io-async or something "any bidi serial",…
-
Would it be hard to include the MKS TFT70 in the buildtree?
I'm asking because sadly BTT does not have an 7 inch screen and that's what I need.
-
Please, before you create a new bug report, please make sure you searched in open and closed issues and couldn't find anything that matches.
**Printer type** - Original Prusa MK4
**Printer firmw…
-
I’ve asked this before, but considering the ongoing discussion on the vNEXT branch (see #491), I thought it made sense to bring it up again.
Will start by saying that I’m not trying to pick a fight w…
-
Thank you for the great setup and instructions. I was able to build it, using Ubuntu VM.
Since I work on Windows, I did this to flash the board:
st-flash.exe --reset write stm32f429i-disco.bi…
-
For some hardware advanced features (like DMA) it's impossible to combine core code and pure HAL/LL calls cuz internal handles are hidden inside core code and used only internally.
For example, for m…
-
Nice effort, this will be most useful.
I quickly built and flashed this GRBL port on Fedora ( I also did the modprobe quirks config. )
Hopefully it will not be too difficult to port it for a mor…
-
I have been using STM32 series for years and I tend to swap between the STM32G0, STM32F0, STM32F4, STM32G4 and now the STM32C0. I have been using drivers but would love to only have a general driver t…
-
I downloaded the project "GRBL_LM4F120H5QR" from https://github.com/Smitter/GRBL_LM4F120H5QR.
I have modified it for the TI Stellaris Launchpad TM4C123gxl a US$12.99 board with an 80MHz ARM M4 Cortex …
Moffy updated
9 years ago