-
I am currently running on Version 1.4.1 - I tried to sync up and build with your current sources.
(last change) Fix 64 bit support - and I am getting compiler errors.
All of the JPEG files are now…
KurtE updated
2 months ago
-
### Description of problem
When uploading to two teensy boards, either a 4.1 & 3.6 or two 3.6's, platformio can't compile / upload for the correct boards, even when explicit upload_ports are set. S…
-
Hi,
I am trying to build these 2 libraries for optimization on microcontrollers such as Arduino Teensy or STM32, using ARM Cortex-M7. Is it possible? If yes, could you give me some pointers?
Tha…
-
Do you know if this would work on a Teensy 2.0? ...or does it require the Arduino bootloader/code?
-
The SPI_DATA_RATE template parameter to addLeds() is declared as a uint8_t. On Teensy 4, DATA_RATE_MHZ and DATA_RATE_KHZ are defined to pass the raw clock rate in Hz to the Controller class, yielding …
-
```
Attached is a patch to support hardware SPI on the AT90USB1286, tested and
working on the Teensy++ 2.0 board.
The user should define __AT_AT90USB1286__ to enable the changes.
```
Original iss…
-
```
What steps will reproduce the problem?
1. Constructor for HW SPI
U8GLIB_SSD1306_128X64_2X display(SS, 9, 14);
vs for SW which works
U8GLIB_SSD1306_128X64_2X display(SLK, MOSI, SS, 9, 14);
What i…
-
```
Attached is a patch to support hardware SPI on the AT90USB1286, tested and
working on the Teensy++ 2.0 board.
The user should define __AT_AT90USB1286__ to enable the changes.
```
Original iss…
-
```
What steps will reproduce the problem?
1. Constructor for HW SPI
U8GLIB_SSD1306_128X64_2X display(SS, 9, 14);
vs for SW which works
U8GLIB_SSD1306_128X64_2X display(SLK, MOSI, SS, 9, 14);
What i…
-
```
Attached is a patch to support hardware SPI on the AT90USB1286, tested and
working on the Teensy++ 2.0 board.
The user should define __AT_AT90USB1286__ to enable the changes.
```
Original iss…