-
Reference this forum thread:
https://forums.adafruit.com/viewtopic.php?t=210269
In short, I have a PyPortal Titano that monitors the state of charge of a LiPo battery via an I2C interface. It repo…
-
### CircuitPython version
```python
Adafruit CircuitPython 9.0.3 on 2024-04-04; Waveshare ESP32-S3-Zero with ESP32S3
Board ID:waveshare_esp32_s3_zero
UID:437BAD95F6CC
```
Libraries updated to …
-
This issue is for gathering resources on writing USB firmware in Rust and for tracking progress on building a generic USB stack in Rust.
This is basically a place where people working on USB firmwa…
-
I have 2 SGI O2s that work well with any standard PC PS/2 keyboard that I have. When connecting them to my `ps2x2pico` adapter everything seemed to work until I pressed the Ctrl key. It acts as if it …
-
**Summary**
I recently bought a stack of puya py32 mcu’s after reading this [article](https://jaycarlson.net/2023/02/04/the-cheapest-flash-microcontroller-you-…
-
Build of project fails
Transcript -
```
david@rp54bw64full0512:~/Projects/pslite $
david@rp54bw64full0512:~/Projects/pslite $ git clone https://github.com/oyama/pico-sqlite.git
Cloning into …
-
What would need to be done to add MIDI USB Host support ...I have MIDI kit, time, patience, reasonable programming skillz, and very little knowledge about low-level USB.
-
**Hello,**
**I'm encountering an issue when trying to integrate the mbedtls library with the Pico-SDK for my Raspberry Pi Pico project. The CMake build fails, and I'm unable to resolve the problem …
-
Compiling version 3.7.0 for a Raspberry Pi Pico W using Earle F. Philhower's ArduinoPico core in the Arduino IDE gives these errors:
{standard input}: Assembler messages:
{standard input}:9169: Erro…
-
### Operating System
Linux
### Board
Feather nRF52840 Express
### Firmware
In the function `board_get_unique_id` from `hw/bsp/nrf/family.c`, here is the relevant section of the code -
```c
s…