-
### Description
As of PR https://github.com/MarlinFirmware/Marlin/pull/11714 with TMC2208 library 0.2.5 SW Serial on LPC1768 Palttform seems to be supported.
I'm currently Setting up a LPC1768 b…
-
I just assembled eleksmaker a3 laser and would like to change it's mana controll board which runs grpl on arduino to grbl_esp32 (grbl upload over wifi, faster mcu, ...)
I tried to look up the docum…
-
### Description
When setting TMC2208 as the stepper driver, I get multiple errors compiling.
### Steps to Reproduce
1. Include libraries TMCStepper, TMC2208Stepper, and TMC2130Stepp…
-
In the example config, the X/Y/Z/E0_DRIVER_TYPE should be changed to `TMC2208_STANDALONE` to best drive the steppers on the board that comes stock with the printer.
-
#### What were you doing?
I want to print this: https://www.thingiverse.com/thing:2105393
It works with 1.3.8 but not with 1.3.9
#### What did you expect to happen?
A good and smoo…
-
@benlye Congratulations for your work.
I would like you to consider adding support for OpenBLT bootloader. It is an OpenSource bootloader suitable for the use with many microcontrollers, and, therefo…
-
### Environment
Azteeg X5 Mini WiFi
Marlin bug fix 2.0.x version - Aug 8th, 2018
### Description
#define X_DRIVER_TYPE TMC2208
#define Y_DRIVER_TYPE TMC2208
#define Z_DRIVER_TYPE TMC220…
-
Not so much a request/bug as a simple question.
In the Configuration_adv.h, the standard setting for a TMC2208 Z axis is set to 3,
and the #define E0_HYBRID_THRESHOLD is set to 30 ?
But i wound…
-
I have SKR_Pro_V1.1 and TMC2208v3 drivers in uart mode using the dual z connection. I've gotten all 3 axis moving with commands in Pronterface properly. when I home the X,Y axis they seem to work ok h…
-
Bug Description
In file included from Marlin/src/HAL/HAL_STM32F1/../../inc/MarlinConfig.h:38:0,
from Marlin/src/HAL/HAL_STM32F1/HAL.cpp:30:
Marlin/src/HAL/HAL_STM32F1/../../inc/San…