-
Hello,
I need to power the board with a regulated external 3.3V (preferred) or 5V source:
**In case of 3.3V:**
- Is ok to connect it trough `3V PIN` and `GND`?
**In case of 5V:**
- Is ok to…
-
### Hello, I'm trying to use the QNA-UC5G1T 5Gbe Adapter to connect to my DS920+ but can't get more than 100mbs transfers regardless of what protocol I choose. I've tried SMB and iSCSI. I have Static …
-
There seems to be some issues with the set of whitelisted commands.
I am using an im8xmp verdin SoM.
My build is based on the tdxref default manifest configuration (not the TorizonOS one).
I have…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
I have the following problem. I set the PDO values for PDO2 and PDO3 to 15V/3A and 20V/5A resp., using a modified version of Example2-SetParameters.ino:
`#include
#include
STUSB4500 usb;
dou…
-
Newer python based panda flashing has a issue with the white/grey panda and will not flash
```
scons: Entering directory `/home/user/panda'
scons: Reading SConscript files ...
scons: done readin…
-
-
It is required to have a device simulator.
An alternative to solve this situation is to create a **simulator.**
Do by software what I'm expecting from the hardware.…
-
Not really sure how this works, so here is a modem log dump of my last boot,
```
kernel: usbserial: USB Serial support registered for GSM modem (1-port)
kernel: modem-power serial1-0: supply vbus…
-
**Describe the bug**
The wifi device doesn't appear with `ip a` command.
Failed to run INIT ucode: -110
`dmesg |grep iwlwifi` gives:
```
[ 4.150315] iwlwifi 0000:00:0b.0: can't derive rout…