-
Hi,
I'm using the version of UAutomizer from the archive2021 repo of SVCOMP and I'm getting and error when trying to validate a witness. I'm running the following cmd
```
./Ultimate.py --spec ~/g…
-
LuCI shows RX Rate / TX Rate as:
54.0 Mbit/s, 20MHz
6.0 Mbit/s, 20MHz
If I set `legacy_rates` to `1`, TX Rate drops further down to 1.0 Mbit/s.
Speedtest on my phone seems to verify this, I ge…
-
In Webman-MOD 1.47.35 (latest binary, I assume), mounting a disc in XMB after a disc has already been mounted (with Webman) will cause the disc to automatically start (while the first one does not). O…
ghost updated
3 years ago
-
There is something funny about the navigation, I get caught in Beta Plugin Land and it is hard to get out.
Also there seems to be a Beta nav.adoc that is the same as the header plugiin adoc.
I wou…
-
I get an error with hcxmactool and -a (vendor) and pmkidin
error is "Segmentation fault"
When using it with hccapxin everything seems to be ok, but what i did notice is that file size compared wit…
-
主机硬件：ThinkPad x260
无线网卡：Intel 8265NGW，在Windows/Ubuntu/centos下测试正常。
Hackintosh版本：bigsur，11.4 (20F71)
opencore：0.7
kext release：1.30
问题现象：
1、无线AP的ssid单独关联至5G射频口时，8265网卡可以正常通过密码关联到这个ssid，也能工作，但是协…
upkon updated
3 years ago
-
==========uptime
23:29:33 up 2:50, load average: 1.02, 1.11, 0.97
==========df -h
Filesystem Size Used Available Use% Mounted on
rootfs 12.3M 12.3M …
-
Linkchecker reveals no less than 96 broken links in the plugins manual. I ran `linkchecker -r8 docs/index.html`after a local build.
Attaching the logfile: [linkcheck.log.gz](https://github.com/op…
-
This also happens to many of the current plugins
ochart -OK
statusbar -fixed
polar - fixed
logbookkonni - fixed
vfkaps
shipdriver
otcurrent
I have checked many of the plugins, but not all …
-
Hi, aldostools.
I have an issue. I am using HEN on 4.87 and have webman mod 1.47.35.
I have manual fan speed at 30% and PS2 fan speed at 40%.
When i mount PS2 Bin.enc, fan speeds up and then…