-
### Related area
ESP32-S
### Hardware specification
ESP32-S
### Is your feature request related to a problem?
Can ESP32 only connect to WPA2? Can't connect to WPA and WPA3?
### Describe the solu…
-
Hi
The driver is successfully installed into the Pi 4 with 64bit Pi OS. The onboard wifi is disabled via the `/boot/config.txt` file. After the reboot, the `wlan0` shows a list of available wifi en…
-
I'm trying to run start.py to set up a mesh portal. Things look like they are going well until wpa_supplicant tries to initialize the interface. I am also not sure if the channel pair not allowed me…
-
Running the example from espidf for [NimBLE](https://github.com/espressif/esp-idf/blob/9f9bd8c0331a584b3933d9ba215f013ac1889c84/examples/bluetooth/nimble/bleprph/README.md) with encryption enabled has…
-
Every few days my board drops wifi and fails to reconnect.
There seems to be no other issues with wifi devices in the house including surveillance cameras (on 2.4 ghz).
Router is RT3200 supporting 2…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
After fresh flashing a SD card with CB1_Debian11_bullseye_minimal_kernel5.16_20220929.img just released i put into CB1 and finally i get it connected to my WPA2 network, but SSH connection (port 22) b…
-
Hi, I've been attempting to get the Arduino version running, but i get this if I use the original.
`Resolving esp32dev_root dependencies...
Tool Manager: Installing toolchain-xtensa32 @ ~2.80200.…
-
### Board
nodemcu
### Device Description
normal board
### Hardware Configuration
normal config
### Version
v2.0.3
### IDE Name
Arduino IDE
### Operating System
win
### Flash frequency
40
…
-
## Environment
- Development Kit: esp-idf + esp_rainmaker
- Kit version : esp-idf the main branch after v5.0-dev
- Module or chip used: ESP32C3
- IDF version (run ``git describe --tags`` t…