-
I have a NanoCUL stick, 433MHz, C1101, ATMEGA328P .
https://www.smart-home-komponente.de/nano-cul/nano-cul-433-extern/#cc-m-product-8485093976
Is it possible to flash the firmware on it?
-
### Describe the issue you are experiencing
Hello,
I'm facing an issue with HA OS to send a signal from an add-on container (running [Pilight](https://manual.pilight.org)) to the GPIO of a Raspber…
-
I sent back my mi|home hub in favour of getting the ENER314-RT module so I could roll my own energy monitoring with this library and [OpenEnergyMonitor](https://openenergymonitor.org) (emonCMS). Howev…
-
I've now had many days using the Lora gateway and am finding that only 20% of packets sent by a remote node are received by the gateway. This isn't a range issue, as I moved the sender within a few f…
-
I'm looking for a way to emulate pressing the doorbell button remotely. I realize this isn't a support channel, but was hoping perhaps someone was aware of a command or some other mechanism (433 perha…
-
### The problem
As per the title, i've rebuilt a few sensors https://www.airgradient.com/diy/ and flashed them with ESPHome (project: https://github.com/ajfriesen/ESPHome-AirGradient ).
I've bui…
-
(Side comment you can skip -- Based on the interest in this project I went ahead and spent some more time (a lot actually) in ghidra looking at the boot loader code and managed to get the ppsMmcTool.t…
guino updated
2 months ago
-
Hi
Since version 2023.1 and the change from Netatmo on the autorisation process, the Netatmo plug-in generate the following error: Access not granted check username and password whilst I can connect …
-
The TinyGS.ino sketch indicates that the ESP32 dev board + SX127X (Custom build, OLED optional) is supported.
However, in the drop down Board Type list of the Ground Station configuration, the SX127X…
-
If I understand correctly, presently DroneBridge on ESP32 can connect to a PC/Tablet/Smartphone, but not to another ESP32, where two of them would emulate a wireless serial link?
If so, this is a f…