-
看作者的经历有使用micro与usb host shield mini ,我目前使用的是3.3v的micro(在arduino上是Leonardo),按照你的教程修改了usb host shield mini 的供电,使usb为5v,其他引脚都直接与模块连接(测试过vcc为3.3v),但是烧录例程usbhidbootkdb 还是提示无法识别"OSC did not start",想问问作者的方案是…
-
Hi Roberto,
I already sent you an email (you answered). I am trying to use the AnalogButtons library with the ESP32 board (DOIT devkit 1) but I cannot get a result. I can read the analog values of th…
-
So from what i understood from reading the forum and digging around i found out that you turn the USB flash drive with 2303 to a development board but what if you buy this thing:
http://www.ebay.co.uk…
ghost updated
7 years ago
-
```
Hardware:
- Arduino Leonardo
- WiFi Shield
Software:
- Arduino IDE 1.0.1
- Mac OSX 10.7 / Ubuntu 12.04
Libraries:
- WiFi Libraries (downloaded from arduino.cc)
What steps will reproduce th…
-
```
Hardware:
- Arduino Leonardo
- WiFi Shield
Software:
- Arduino IDE 1.0.1
- Mac OSX 10.7 / Ubuntu 12.04
Libraries:
- WiFi Libraries (downloaded from arduino.cc)
What steps will reproduce th…
-
```
Hardware:
- Arduino Leonardo
- WiFi Shield
Software:
- Arduino IDE 1.0.1
- Mac OSX 10.7 / Ubuntu 12.04
Libraries:
- WiFi Libraries (downloaded from arduino.cc)
What steps will reproduce th…
-
```
Dear friends,
Is Leonardo support planned?
Jonas
```
Original issue reported on code.google.com by `mrqwa...@gmail.com` on 23 Nov 2012 at 10:43
-
```
Dear friends,
Is Leonardo support planned?
Jonas
```
Original issue reported on code.google.com by `mrqwa...@gmail.com` on 23 Nov 2012 at 10:43
-
attempting to compile nexshutter.ino yields the following errors:
Arduino: 1.8.5 (Windows 10), Board: "Arduino/Genuino Uno"
NexShutter:768: error: 'Serial_' has not been declared
bool Proces…
-
# PCB
- modify edges of button so when being routed on mfr. it doesnt come out round
- add fiducials for alignment
usb doesnt sit well because of lip
- ADD PIN1 MARKER TO Q1 SO8
- crystal needs to b…