-
I have a Dell Inspiron 1501 with a 65W charger that won't work. I tried your code on a Arduino Uno running at 16MHz and using pin10 to drive the centre conductor (ground of dell charger connected to g…
-
Hello,
probably I'm doing something wrong or I didn't understand the usage of this library properly. I have a SSD1306 128x64 display. My ATtiny85 has a Bootloader set to 8 MHz. I use the ATtinyCore…
-
hello,
will this work for the newer bmp180 >?
i am looking to have a BMP180 light a different led color for different ranges of altitudes.
any chance you can help ?
this will be implumented on my FPV…
-
*Created by: chenz*
I'm having trouble programming an ATtiny2313A with the RSTDISBL fuse enabled. It works when using the Windows software under Wine. Here is the config (SPIEN off, RSTDISBL on):
…
-
Hi!
I'm currently working on adding Arduino support for ATmega165/325/645 and ATmega169/329/649 through an Arduino core called [MegaCore](https://github.com/MCUdude/MegaCore/tree/atmegaxx5-atmegaxx…
-
I think there is a bug in the way the simulator handles ADC in free running mode.
This is a mode, documented in the datasheet, in which the ADC keeps sampling the chosen input.
In is configured us…
-
Hey Tim -
I noticed on your project page for the Clock you reference (with photos) a full 3D model of the clock complete with the digits, PCB, and rear-facing components.
The VRML files (.wrl) …
-
Hi,
if I use this code on StandardFirmataPlus, the firmata works on the begin but then it stop when I send Firmata.digitalwrite from my client program.
Code into StandardFirmataPlus:
void …
-
Build error on MH-ET LIVE Tiny88
Using Platformio inside VSCode
**platformio.ini** file :
```
[env:attiny88]
platform = atmelavr
board = attiny88
framework = arduino
upload_protocol = micr…
-
it seems SoftwareBitBang/Timing.h does not have any settings for atmega328 and F_CPU == 8000000L and thus does not compile. would copying the attiny85 values do the trick, and is there a guide for wh…