-
Openocd added multi-drop support, but it [needs CMSIS-DAP support SWD_Sequeue](https://review.openocd.org/c/openocd/+/6117). It means we need a firmware that is newer than [this commit](https://github…
-
Hello,
I have a problem debugging an Adafruit Feather M0 using VSCode-Arduino. I have installed libusb to get Openocd to recognise the jlink.
I'm using:
- Segger Jlink with v6.20g firmware.
…
-
A minimal repro:
```
$ cat foo.nix
with (import {});
stdenv.mkDerivation {
name = "foo";
shellHook = ''
alias foobar="ls -la"
'';
}
```
And then running:
```
$ nix-she…
-
Hi,
I have a problem with my ph3 adv gimbal.
No light, no boot.. i crashed the ambarella chip.
I have discover the ambatools inside the loader firmware with the uart0 interface. You can use thi…
-
Hi @bgilbert @theonewolf and @wenluhu - just brainstorming here.
I've been compiling a lot of utility libraries for ARM in addition
to the ones in here, such as tune2fs, mknod, and gammaray.
Mostly, I…
bamos updated
9 years ago
-
I built whisper.cpp from source on a Galaxy S23 ultra (Android 13) in Termux, and when I run the following command...
`whisper.cpp/main -f whisper.cpp/samples/jfk.wav -m whisper.cpp/models/ggml-bas…
-
Hi,
First of all, thank you for this project. This is something that I need for testing qnx and I almost got it running but there are some issues and I hope you could help me.
Specifically, I m…
-
I am trying to probe information for a Cortex-M0 based MCU using `probe-rs`.
I tried running `probe-rs info` for this but there seems to be some communication issue. I can connect with a JLinkServe…
-
### Please make you search through our existing [issues](https://github.com/Marus/cortex-debug/issues?q=type:issue) (both open and closed)
It may help to look at these instructions in `Preview` mode.…
-
### Describe the bug
fw_printenv fails with error;
Cannot parse config file '/etc/fw_env.config': No such file or directory
FIX;
create file
/etc/fw_env.config
contents;
/dev/mtd3 0x0 00010000 …