-
pp.runpp(net)
_powerflow(net, **kwargs)
_powerflow
ppc, ppci = _pd2ppc(net)
_check_for_reference_bus(ppc)
n.py", line 322, in _check_for_reference_bus
UserWarning: No refere…
-
makeYbus fails when using pypower test cases due to one-indexing issues. For instance, for:
`import pypower.api as pp
ppc = pp.case14()
baseMVA, bus, branch = ppc['baseMVA'], ppc['bus'], ppc['bra…
-
Hi,
**I encountered a weird issue. The DC power flow can converge, but the DC OPF cannot, even after all branches' rate_A have been set as 0 (i.e no limit). How could this happen? (I have checked t…
-
Hi:
I am using asap-7 behavior model provided inside hammer. I was wondering whether both ports of SRAM2RW* instance will be used to write **and** read, because I want to substitute asap7-sram wi…
-
Experimental branch pushed, discuss testing and issues below
-
Hi all....
I working on developing new hardware for GRBL. My question, is there demand for specially developed hardware for GRBL? And if so what are they?
My thoughts were to start with some simple …
-
I have a little bit of sun today and have been looking at the dashboard.
I've noticed that the L1L2L3 Forward Watt and Reverse Watt are exclusive as if i had a meter working after the summation pri…
-
## Before you post a new issue - you must first check the following (and check the boxes with an "X" below)
- [x ] 1.) Can you login using the smartphone app We Connect (not We Connect ID or We C…
-
Hello, recently I've also been using a PV inverter on the AC OUT. Is it correct that only the "overall performance" is displayed?
I know that the tile can also display multiple inverters. Then ther…
-
https://github.com/TonyM1958/HA-FoxESS-Modbus/issues/4#issuecomment-1517860676