-
Any idea how to pickup the temperature sensor and humidity sensor in the cable that it ships with?
I am unable to see where I have access to 4.2.6 version to download it. HomeBridge web UI only sho…
-
I'm looking for an IR termometer to ESPHome and I found this.
But I can't find a gy906, only a MLX90614ESF-BAA-000-TU, will this code work for that sensor?
https://www.digikey.se/product-detail/en/m…
-
Does anyone can confirm that the custom component works?
It does not work for me:
> The following integrations and platforms could not be set up:
>
> midea_dehumi
> Please check your config.…
-
### The problem
The integration is no longer reporting current temperature, humidity, or operation status. Both thermostats are behind a RedLink gateway.
Edit: After further testing, it's no lon…
-
I have a combined sensor which delivers both, temperature and humidity. It would be great if home bridge-owfs could identify this and also add the humidity as a device.
Here is my output of powder…
-
Me again, back from vacation. I have a use case that I suspect is somewhat common that I can't figure out how to accomplish with the current code.
I have an on/off (non dimming) switch that is cont…
-
## The problem
These kind of errors appear in Home Assistant log, for all integration sensors defined (all at once, same exact timestamp):
Logger: homeassistant.helpers.event
Source: componen…
-
I have:
- [x] [Searched all issues](https://github.com/Templarian/MaterialDesign/issues) to make sure there isn't a request for this icon.
- [x] [Searched the current library](https://material…
-
Bei Verwendung von Heizungselementen und Fensterkontakten wären folgende Zustände schaltbar sinvoll:
- Hüllschutz/ Vollschutz aktivieren/deaktivieren
- Ecomodus einschalten/ausschalten
-
After a while (~24hrs) running the accessories page is blank and the Home app shows the devices as not responding. The log shows that it is still updating the statuses.
Was working great for a long…