-
Simple question: for a small project, i was developing something very similiar to espeasy rules.
As reinventing the wheel is not smart, any hint on which parts should i backport without dismounting…
-
### Discussed in https://github.com/emsesp/EMS-ESP32/discussions/1637
Originally posted by **SoftVienka** February 26, 2024
Good day.
Can you please tell me how the loading of temperaturesens…
-
Is it possible with this board to use an external temperature sensor?
I currently have two TZ models. They have a theoretical lowest power consumption of 200W. However, I have only seen it when the…
-
Hi,
it isn't a real issue, but I'm using an Aquara temperature sensor and it is too slow to properly control my HVAC quickly. it could wait 10 min to report a change from 1°C...
What temperature…
-
I currently already have a wemos connected to my panasonic for other functions.
Just leaving this issue here so we can discuss if we want these functions also in the main release as extra options.
W…
-
When running sudo ./setup.sh I'm getting the following error - fatal error: azure_c_shared_utility/xlogging.h: No such file or directory
I'm guessing the azure_c_shared_utility should be part of the …
-
Note: this error seems to have started since i pulled REM this morning, after the Steinhard-Hart option was added (so this is arguably my own fault :-)).
I haven't yet fired up NJSPC or Dashpanel, …
-
It would be nice to be able to use the one-wire interface from the MEGA-BAS in REM. My original setup has some DS18B20 sensors mounted in my pipes. I have moved to a MEGA-BAS with some 10K thermisto…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
I have flashed my Sonoff THR316 wiht tasmota32 13.4.0 and configured the gpio inputs, with 27 as output_hi and 2…
-
### The problem
When I put on our electric sauna (6 kW) most of the graphs start after a while to draw horizontal straigth lines with no measurement values. I have to restart HA to get measurements w…