-
After making much much progress on my Raspberry (Node Red is just running fine and polling almost all data I need from my Vaillant flexotherm and send parts of this data to my Volkszähler) I need some…
-
My broker is installed on RPI 192.168.1.35 and
ebus board (via Wemos is) on 192.168.135).
Ebusd config:
`EBUSD_OPTS="--scanconfig -d 192.168.1.135:9999 --httpport=801 --configpath=http://ebusd.…
-
I have a problem, ebusd is running on an raspberry pi, with a DIY converter.
When I try to read any parameter I get "ERR: element not found"
When I scan a slave on the bus I get "ERR: SYN received"
…
-
When listening to my vaillant (08.bai.csv, 15.700.csv and bai.0010015600.inc) I read 5 main topics (global, scan08, scan15, bai and broadcast). I'm interested in the bai readings and e.g. there is a t…
-
Hi,
I'm running an ebusd daemon successfully on my RaspberyPi Debian. The http request works fine and I can access RaspberryIP:8889/data successfully using http request. All available values show up.…
-
after changing ebusd config file i do:
`sudo reboot`
but then ebusd is not starting automatically:
if i do on a raspberry pi3:
```
sudo cp contrib/debian/init.d/ebusd /etc/init.d/
sudo update…
-
Hello John,
Now the Ebus deamon is back working on my RPi Zero wifi i have following question:
How can i log all commands passing on the ebus?
Why i ask this question?
I have only basic knowle…
-
That's an issue, but maybe it would be worth mentioning that on ebusd website - as since the last HA release, native support for ebusd was added. For now it's only reading predefinied messages, but ho…
Dinth updated
4 years ago
-
My configuration reports the System flow temperature (in my case that is the temperature of the water flowing from the buffer to the underfloor heating circuits) on this URL:
/facilities/[SERIAL]/liv…
-
I am trying to request a single time schedule topic over MQTT:
`mosquitto_pub -h 192.168.10.200 -t 'ebusd/b7v/z1Timer.Sunday/get' -m '?'`
but instead I first get the correct result and then the same…