-
**_Reported by jiequan wu:_**
Test Steps:
1. cd samples/net/http_client
2. make pristine && make BOARD=arduino_101 flash
3. set ipv6 address on linux host
$ sudo ifconfig eth0 inet6 add 2001:db8:…
-
### Description
After update zephyr to 1.9.0, `CPU exception` occurs when running Ocf Server on A101(ble mode and Ethernet mode) and OcfClient cannot connect to OcfServer on FRDM_K64F.
### Test…
-
**_Reported by jiequan wu:_**
I created a prj_arduino_101.conf file to test http_client sample app on Arduino 101 board.
prj_arduino_101.conf:
```
CONFIG_RANDOM_GENERATOR=y
CONFIG_NETWORKING=y
…
-
**_Reported by Paul Sokolovsky:_**
eth_enc28j60.c driver in the net branch was update to native IP stack in https://gerrit.zephyrproject.org/r/#/c/5006/ , and used that patch as a template to apply s…
-
**_Reported by jiequan wu:_**
Test Steps:
1. cd samples/net/http_client
2. make pristine && make BOARD=arduino_101 flash
3. set ipv6 address on linux host
$ sudo ifconfig eth0 inet6 add 2001:db8:…
-
**_Reported by Paul Sokolovsky:_**
eth_enc28j60.c driver in the net branch was update to native IP stack in https://gerrit.zephyrproject.org/r/#/c/5006/ , and used that patch as a template to apply s…
-
**_Reported by Juan Manuel Cruz Alcaraz:_**
ENC28J60 ethernet device driver should be adjusted and tested to work with new IP stack.
(Imported from Jira ZEP-859)
-
**_Reported by Juan Manuel Cruz Alcaraz:_**
The ENC28J60 driver fails to receive big data frames.
(Imported from Jira ZEP-1098)
-
**_Reported by jiequan wu:_**
Test Steps:
1. cd samples/net/http_client
2. make pristine && make BOARD=arduino_101 flash
3. set ipv6 address on linux host
$ sudo ifconfig eth0 inet6 add 2001:db8:…
-
**_Reported by Lei Liu:_**
Configuration
==========
x86
Bug detailed description
===================
ENC28J60 driver doesn't work on Arduino 101.
There is no network activity from the ENC mo…