-
Hi,
Using the bootloader I was able to change the baud rate to 57600.
At first I replaced the baud rate of 1000000 by 57600 in the scripts:
- stream_visualizer.py (lines 253-254)
- cdm32…
-
Hello,
Lately I've been trying to install the provided code on a D1 mini with a PN532 board. In the past, I have been successful on breadboard but now that I want to use a more permanent package (u…
-
Hi,
the latest feather express release bootloader doenst work when i flash it:
https://github.com/kaidyth/nrf52_bootloader/releases/download/0.5.6/feather-express_bootloader-fbe4571_s140.hex
`n…
-
Adding the line `CONFIG_PARTITION_TABLE_TWO_OTA=y` to the sdkconfig.defaults file does not cause the partition table on the device to be changed from the default single app configuration.
It DOES c…
-
operations on the eMMC block device cannot be performed in zip packages because TWRP locks the eMMC while installing zips.
for a real world example of the impact of this bug, take a look at my [repar…
-
Hi @Ralim,
thanks for the tool. I've recently bought the Xiaomi Smart Speaker and peeked under the hood.
The hearth of the device is BES2300 and after looking on the internet I found this repo. …
-
Hi Cefn,
Just received another couple of Wemos D1 Mini and Arduino layout boards from Aliexpress and noted that both will not flash. I've run the following to ID them for you.
esptool.py --port …
-
## Describe the Bug
An error occurred while flashing the keyboard.
I used an auto-compiled firmware [#562](https://github.com/SonixQMK/qmk_firmware/actions/runs/1292084453) from a br…
-
First of all thanks! Jubilinux is used by an army of T1 diabetics still for automating their medical devices. It truly has been a life saver for me and many others. The Edison/Jubilinux combo has prov…
-
This is running 0.5.0-dev.1.0 on a Macbook Pro after running `dartino x-download-tools`.
```
kasperl-macbookpro2:stm32f746g-discovery kasperl$ dartino flash disco-light.dart
Using template settings …