-
I have spare input in esp32 board. can I use lathe mode with esp32 if yes then kindly inform me how to set gpio pin for spindle encoder.
I am using 1.5 kw servo as a spindle which can do both operati…
-
Using the GitHub wiki, write up:
- [ ] CNC.js and how to connect from a laptop, the RPi, etc.
- [ ] using the gcode patcher
- [ ] using the gcode optimizer
- [ ] calibrating pen height, feeds
- […
-
i am asking if you can provide some detailed schemes on how it works to understand quickly and better the grbl code. see an example here http://smoothieware.org/howitworks
-
When doing highspeed (300mm/s) raster engraving syncronisation between laser pulses and movements is lost, resulting in ghosting and deformed output,
had similar issue with FluidNc, fixed by using …
-
Hello friend, I was see in youtube a video for SD SEND FRO ONE ARDUINO TO GRBL MASTER ARDUINO A GCODE, this is the code that I need or could share the Master Files???
Now I working in similar proje…
-
This issue will automatically convert a Grbl_Esp32 machine definition file to FluidNC YAML format.
Change YOUR NAME in the title to some string that identifies your machine configuration.
IMPORT…
-
Hello,
Recently started building cnc machine and for the brains I choosen the old creality 1.1.4 board With atmega1248p ic on it but the problem is how to make all steppers work because all step and …
-
Hello everyone, there is a command in the GRBL library that allows me to rotate an axis (stepper motor) at a certain speed almost indefinitely, that is, without defining the length I want to reach but…
-
I understand, vibration is difficult question.
If I try slow or fast speed - looks god, minimal vibration, but vibration increase when motor works on middle speed.
Who knows, which GRBL settings m…
-
**Is your feature request related to a problem? Please describe.**
I'm always frustrated when using GRBL. Don't get me wrong, it gets the job done. But it's also been idle for over 3 years, and peo…