-
### Category
BLE
### Hardware
heltec_v3, t3s3, t-deck, t-watch s3
### Firmware Version
2.2.3 - 2.2.6
### Description
Since firmware 2.2.3 the pairing with Android APP fails for de…
-
I have encountered an issue with the Zephyr ESP32 support page. After following the provided steps [esp32_devkitc_wrover](https://docs.zephyrproject.org/latest/boards/xtensa/esp32_devkitc_wrover/doc/i…
-
### Describe the problem
During the initial installation on the beta version of Venus OS 3.20 ~ 16, everything went fine, except that the BMSs kept connecting and disconnecting via Bluetooth, so I un…
-
Hi,
I tried with a 24v inverter from easun which however is identical to the 2424MSE1 of MPP solar looking at the esphome log I see that it sends something but receives nothing I also checked the wir…
-
### Category
Hardware Compatibility
### Hardware
Heltec v2
### Firmware Version
2.2.0 alpha
### Description
Using Web flasher to wipe and install firmware (Nice tool!)
Ver 2.1.23 beta loads a…
-
### Platform
ESP32
### Description
### Problem Summary
I have a node that I like to have connected via WiFi... but on occasion, I'd like to be able to connect via Bluetooth, but can't becaus…
-
### Describe the bug
After an update to Venus os 3.0 the SOC wasn't shown on Pages. It was shown in the Menu under BMS, and the BMS was correcly connected too. Also the SOC weren't in the VRM Porta…
-
### Describe the problem
Hello,
i use the seplos BMS at my Victron system. At each seplos BMS i have configured the parameter to see which is the right storage at the driver, i configured the capa…
-
### Describe the problem
HI,
On raspberry after upgrade to Venus OS 3.20 Build 20240213074236 the JKBMS BLE is not working anymore. I uninsalled and reinstalled beta build "v1.2.20240219beta" (mr-m…
-
At some polnt the "Brightness Down" button, second from the left in the top row of the remote, next to ON) used to dim the brightness. If you hit ON, it would set to max brightness and pin the effect…