-
**issuing hf mf chk keys returns nothing**
No output from hf mf chk command, "hf mf chk *1 ?" returns no keys and executes in no time and returns: Time in checkkeys: 0 seconds
RDV3 and pm3-easy …
-
When I flash my brand new pm3-rdv40 with iceman's fork (compiled from git HEAD), `hw tune` reports that the HF antenna works (more than 40V IIRC and 70V for the LF) but when I put a tag in front of th…
-
Hi,
I just pulled the latest version and tried to flash it onto a proxmark3 easy as well as my proxmark3 RDV2 (before trying the RDV4). However, I have severe issues:
- flashing the bootrom works
…
-
I'm opening up for discussions on when the next offical pm3 release should be published.
I suggest that after the following items it would be fitting.
1. Emv commands needs to be finished.
2. apd…
-
Latest Client and firmware see below output for details. Checks key A when B is input and B when A is input:
pm3 --> hf mf chk 0 A 2A2C13CC242A
[ 0] key 2A 2C 13 CC 24 2A
.
Time in checkkeys: 0 …
-
I'm not sure whether this is a problem but judging from the video you posted recently, you didn't have this output. I seem to get it though and I'm not well versed enough yet to judge whether its an i…
-
Hi,
I am trying to migrate a graph db from neo4j to Cosmos DB but am stuck at creating\generating the sample movie graph data for migration.
When executing the below command, its throws an erro…
pp329 updated
5 years ago
-
I plugged pm3 in ,PM3 power led and 4 state led are regular work,but andprox info says found 0 deveices and 0 suitable driver. System notification shows charging for device/
However ,When i remove …
-
Hello,
just a little question about firmware.
you speak about Rev E and Rev E light, but not about Rev E Rebooted.
I have a Chameleon Rev E Rebooted, and because firmware of this one doesn't supp…
-
Not an issue just wondering if you guys have seen or been part of the walrus app for android ?
https://github.com/TeamWalrus/Walrus/
Works well apart from its got a lot of lack of support from t…