-
### What happened?
Getting the Git code and compile with "d1 mini esp32" I get the following error message:
Checking size .pio\build\d1 mini esp32\firmware.elf
Advanced Memory Usage is available …
-
I am a newbie, using Visual Studio to compile many times are failed, only compiled successfully once, and this successful one compiled firmware burned into the ESP32C3 and ESP8266 devices are not resp…
-
Hallo,
ich habe das KM271 Board von Daniel Version 0.0.7
Bei Daniel liegen die "dewenni" Versionen 3.2.3 und 3.2.4 mit dabei. 3.2.3 scheint zu laufen und startet (das WLAN wird angezeigt).
3…
-
### Board
ESP32_Cam
### Device Description
None
### Hardware Configuration
No
### Version
v2.0.6
### IDE Name
Arduino IDE
### Operating System
Windows 10
### Flash frequency
80Mhz
### PS…
-
We get a crash caused by a failing assert when we use the following config. In particular we see the crash when using Grayscale and 96x96 resolution. The platform is ESP32-S3 using PSRAM. We trace…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
esp-matter commitid: commit 9bb410d995b6ae81e2025467e5d5bbf494c1e6b1 (HEAD -> release/v1.0, origin/release/v1.0)
andriod alexa app version:2023.8 build version:2.2.5.6769.0
esp32c3
I (51714) ch…
-
Hi, I have a problem with the lamp after updating to esphome version 2022.12 it goes into bootloop. Anyone else noticed problems? The config and serial logs are attached. Unfortunately, I had to disas…
-
Hello Wolle!
Configuration ESP32S3 N16R8, VS1053. In platformio.ini I have recommended the line board = ESP32-S3-DevKitC-1-N16R8 ;chipmodel ESP32S3, USBtoTTL (S3-DevKitC-1)
But PSRAM is not initiali…
-
Hi!
Thanks a lot for your great job!
I've took WEMOS D1 mini and done all the instructions, then connected it to CN-CNT port, but it doesn't work. HA integration is OK, but it doesn't control my AC …