-
After much tinkering I finally got this to somewhat work, but only inside the docker environment.
When running from my Ubuntu system I get the following.
```
Traceback (most recent call last):
F…
-
I am using this great gateway on an DOIT ESP32 DEVKITV1 for the routing of BT data for mi plants and room thermostats. I am using ZgatewayBT an it is the only one activated.
After some minutes of c…
-
### Is this a bug or a feature request?
Bug in Documentation
### What did you expect?
Advice to how fields in the "device configuration" screen map to the Arduino LMIC settings of APPKEY, DEV…
-
hello, Dave,
I'm having huge problems getting my payload up and running and I'm about to give up. After testing on several Raspberry with different Rasbpians, here is a short description of my prob…
-
I have switched from using gpioSetGetSamplesFunc in a C program to using pigpiod and the _433.py program to process RF433Mhz communication from some Chinese security devices. When I was doing it in th…
-
Both modules should be their defaults. I had done a make erase_flash on them. (running in 868 mode) Plugging in my 3rd module - (2nd tx) that the oled isn't working (#1) I can see another pop up on …
-
### Is this a bug or a feature request?
Bug
### What did you expect?
### What happened?
No Connection to LoRa App Server Web Interface, no data from devices.
### What version are your using?
0…
-
I use a simple sender with the default Modem configuration: ```Bw = 125 kHz, Cr = 4/5, Sf = 128chips/symbol```. I do not use the ```RHDatagram``` as in your example, but set the ids directly. This sho…
-
Hi all
I have a partially working implementation of PJON over ESP-NOW (running on ESP32)
https://github.com/xlfe/PJON/blob/feature/espnow-32/src/interfaces/ESP32/ESPNOWHelper.h
https://github.…
-
https://www.aliexpress.com/item/2pcs-868MHz-super-low-power-RF-LoRa-module-SX1276-chip-Long-Distance-communication-Receiver-and-Transmitter/32859550198.html - let's see if we have enough pins left to …