-
Dear Sir,
As you mention that your base library is **_ISP4520_** module based . And you converted into Arduino Library.
Actually Sir I am interfacing nrf52832 with E22900M22s module and using ISP452…
-
stop getting config values so ofter -- look once -- static
https://github.com/pyonair/PyonAir-pycom/blob/32be6ecf263489bd5b757667cb6a40dacfd831c4/code/lib/EventScheduler.py#L121
```python
# import …
-
read and cast to float is dangerous!
return s_to_next_lora
https://github.com/pyonair/PyonAir-pycom/blob/32be6ecf263489bd5b757667cb6a40dacfd831c4/code/lib/EventScheduler.py#L118
```python
# import…
-
Hi, I encounter some strange error, when I try to compile a sketch with I2S library it gives me '#error "I2S is not supported on your board!" ', which is a defined error in the .h file of the lib, but…
-
**Describe the bug**
No EV_TXCOMPLETE event is fired.
**Environment**
- mcci-catena/MCCI LoRaWAN LMIC library@^3.3.0
- Platformio with VSCode (Core 5.1.1, Home 3.3.4)
- TTN v3
- EU868
- A…
-
Hi, I have a strange behavior. All compiles nice and well, the initialization of the boards goes well, but once it hits "Start network join request" (lmh_join()) it doesn't go past that point. On the …
-
### Hardware:
Board: TTGO-LORA32-V1
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/ttgo-lora32-v1.html
…
-
README.md states:
> - When using LMIC debugging, output is automatically routed to the correct serial port.
> *No need to set the `LMIC_PRINTF_TO` parameter to `Serial` or `SerialUSB` manually.*
…
-
I Followed the guide and successfully uploaded the problem but the respod in the serial monitor of my arduino is like this:
Starting
FAILURE
C:\Users\Paul Rodolf Castor\Documents\Arduino\libraries…
-
Hi Manuel,
I pulled the code to my machine.
How have I to start working with it at all?
I read over at your sbfspot fork, that you are compiling with Qt.
Is this true for ElsewhereEdge, too?
Than…