-
**Describe the bug**
As stated in the documentation (https://www.raspberrypi.org/documentation/configuration/config-txt/misc.md) the `include` option "Causes the content of the specified file to be…
gvolt updated
4 years ago
-
When using http://github.com/benhylau/mesh-router-builder to build the mesh-workshop profile the RPI 3B+ will no longer boots and complains about EOF on the ram disk. However using the same builder wi…
-
### Describe the issue you are experiencing
Hallo,
ich nutze einen Pi4 mit USB-SSD Boot und der RPI-RF-Mod.
Heute habe ich von der 3.73.9.20240130 auf die 3.75.6.20240316 geupdated bzw. das ver…
-
Hey.
Yesterday I tried to install keybase on a Raspberry Pi (ARM).
Installing go didn't work, as compiling it on the RPi failed after 17 hours.
After a bit of research I was able to compile it on m…
-
Close
-
Hi, i try boot this version. but i get no console after kernel load:
```
anyka$setenv loadaddr 81008000
anyka$readcfg; sf probe 0:0 ${sf_hz} 0; sf read ${loadaddr} 678000 15DC60; bootm ${loadaddr…
-
### Expected behavior
Run latest 17.06.01 template with existing VPC and expect nodes to stay up.
### Actual behavior
Nodes keep starting successfully and terminating continuously. I switched…
-
```
I have a issue when I run android+linux2.6.28 on S3C6410 board..// the
minicom show this issue and restart repeatly
yaffs_read_super: isCheckpointed 0 …
-
Hi,
I recently got my hands on a L09G and started poking around using the informations available in issue #1 and the [research](https://github.com/duhow/xiaoai-patch/tree/master/research/l09g) fol…
-
i am getting this in serial monitor
t: 0 lx
BH1750 Test
[BH1750] Device is not configured!