-
I am using following topology:
RR (GoBGP) -- PE (FRR BGP, OSPF, LDP, Zebra) -- CE (FRR BGP, Zebra)
I'm using the latest version of FRR (i.e., HEAD of the master branch). The PE-CE connection is …
-
Datagram type for multi-hop routing and associated semantics, which we need to figure out how to properly abstract from the application layer where possible.
-
# Warp Jump's
IBC **Warp Jump**'s - fast, temporary, direct interchain connections.
NOTE: Warp Jump's are the extensions of all current IBC proposals as per [Cosmos ICS](https://github.com/cosmos…
-
**Describe the bug**
With FRR 6.x using `addpath-tx-all-paths` with redundant route reflectors, removing a network advertisement from one AS withdrew the advertisement from another AS that learned it…
Try75 updated
4 years ago
-
As I don't know if you're already aware of it, I mention it here.
In flight mode this is spammed to the log:
Alternately
```
[Kerbalism] -> verbose: CommInfo.Init - Kerbalism: CommInfo handle…
-
### Description:
Connext creates easy to use APIs allowing developers access to state of the art state channel technologies, without the complexity. Apps integrating Connext can offer their users a w…
-
### Description of Issue/Question
get_bgp_config is getting the configuration from the candidate configuration (not committed) instead of the real configuration on JunOS.
### Did you follow the …
-
### Description of Issue/Question
get_bgp_neighbors doesnt seem to work on IOSXE for BGP neighbors in a VRF as isn't able to pick up the peers. If I try with neighbors in the default IPv4 address-f…
-
"show bgp l2vpn evpn neighbors 52.1.1.1 advertised-routes json" results in BGP deamon restart.
Following is the back trace:
------------------------------
```
[Thread debugging using libthread_d…
-
**Steps**
1. Configure BFD in BGP.
2. Create BGP and BFD sessions.
3. Unconfigure BFD from BFD.
After the above steps there is a BFD config available in "show running-config" as below.
bfd
…