-
### Platform
NRF52, ESP32
### Description
I'm not sure the best way to enable this, but what I'd like to be able to do is get a stream of _all_ packets the radio sees in some fashion (not just thos…
-
### Platform
NRF52
### Description
For my home station I would like to not need to rely on wifi (which for me drops off some times, and I have other constraints with it (namely a "not so good…
-
### Description of defect
We have recently introduced new pin name standards in Mbed. Refer to the [Standard Pin Names Porting Guide](https://github.com/ARMmbed/mbed-os-5-docs/blob/developm…
-
Hi!
In the old tock-registers I did the following:
```
(0x90 => __reserved_11),
#[cfg(feature = "rpi3")]
(0x94 => pub PUD: ReadWrite), // pull up down
#[cfg(f…
-
I am currently experimenting with the nRF52 and using the [embassy](https://embassy.dev/embassy/dev/index.html) project. I intend to use an SD Card in the project. However, this library does not appea…
-
### CircuitPython version
```python
"I am on CircuitPython 7, and tried reverting back to 6.3, same results on both."
```
### Code/REPL
```python
# If you have an AirLift Featherwing or …
-
Using a simple touch program in MakeCode:
https://makecode.microbit.org/_C0xg4ievw4C0
1. Download program
2. Touch logo. See face on display. Face clears
4. Touch finger to mic casing on back …
-
Hi,
I'm playing with a GNSS device which is built into the board, communicating over UART. While working on it, I was wondering how to expose it to the user space. There are a couple considerations…
-
**Describe the bug**
It looks like `probe-rs` (`0.24.0`) cannot connect to my `nrf51822` based device because the debug port cannot be connected.
Here is the result of using `openocd`:
```pla…
-
Meson doesn't seem to understand much about linkers; most of the projects porting to meson do something like this:
mapfile = 'libgusb.ver'
vflag = '-Wl,--version-script,@0@/@1@'.format(mes…