-
I notice there is no FAQ. This would help with lots of questions, such as what is the model of power supply? where is the sim? etc.
Might I offer a first item?
Q: What power supply is used?
A: …
-
main.py:
```
while True:
print('hello')
pyb.delay(500) # pyb.udelay(500000) has the same behavior
```
Running the above snippet on a v1.9.4 PYBLITE V1.0, if USB is unplugged and plugged b…
-
## Version of the custom_component
Plugin reports 0.1.1 - I'm not sure if that's meaningful though.
HACS reports a8eee which matches the most recent commit here.
## Configuration
I'm no…
-
To prevent dangerously high LC spikes, Pololu recommends placing a 100uF capacitor across the rails of each driver, as [outlined here](http://www.pololu.com/docs/0J16/5).
Currently, a single 100uF ca…
-
Hi,
We have a few units (RPi4) configured to use Pi Juice Zero boards to assist with start up and clean shutdown via button press and power cut
Power is supplied to the Pi Juice via the 4.2-10v …
-
1. Don't use motor current as the only judgment of torque.
There're two situations, one is if motor torque is bigger enough than load ( a drone), motor current will get bigger along with the load l…
-
integrate Microchip UPD1002 and USB type connector for power supply.
-
### Output of `bubblejail --version`
0.9.1
### Your distro name and version
Arch Linux
### Description
Controller: 8bitdo pro 2 bluetooth
Simply enabling Joysticks and gamepads is not …
-
## Overview
This document describes a system that can accurately measure the energy consumption of application software. Instead of relying on energy measurement circuits that are integrated into t…
-
I have a PWC and UPS, the PWC is wired as per instructions, and the UPS is connected to the MT_DET1
POWER_LOSS_PIN was set to PA4 (MT_DET1)
PSU_CONTROL and MKS_PWC are enabled
When I turn the p…