-
While doing the retract test, my titan motor would buzz and jitter at 40mm/s and miss nearly every step. I am able to command feeds and retracts from the terminal without issue and I even swapped fro…
-
Hello! I have some problems with RC8 and the bltouch as Z min endstop, hope you can help me. I have a MKS gen 1.4 board (#define MOTHERBOARD BOARD_MKS_13) and I have no problems using a mechanical end…
-
1 When I press Abort printing in display menu the head stops and melt th plastic. So I want Z-homing immediatly. I tried insert G28 into queue in the code but it does not work.
( I implemented it on…
-
Hello, I discovered that my Simplify3D start script doesn't fully work in Klipper. My start script is customized to prime and purge the nozzle off the edge of the build plate and then sets the nozzle …
-
With [latest RCBugFix](https://github.com/MarlinFirmware/Marlin/commit/415294801f613e88779c0b2bb57e83767bb595cb), I realized that displaying of SD Card section looks like broken.
folder tree:
```
…
ghost updated
2 years ago
-
Hey thanks for this great Work.
With the Rc3 i have no Z Values in display.
It Shows Only Z:---.--
Repetier Host Shows the Correct Values.
I Use ramps 1.4 with the RC3 Release
My Config
``` cpp…
-
How about enable GitHUB disscussions for collaborate component developers?
-
Hi, I'm having problem where enabling the sdsupport in config.h would render my lcd panel useless, I have reprap discount 2004 and full graphic type tested with and without the sdsupport feature in th…
-
I would like to use a Lidar sensor as an edge finder for a CNC mill. Is it possible to set the Lidar to trigger the endstop pin if the distance changes so that the machine ZERO is at the edge of the m…
-
Could not once print with Klipper as I always get "Move exceeds maximum extrusion (0.647mm^2 vs 0.640mm^2)" after the prime start code. Slicer is Cura 4.8. Printer is an Ender 3 with MicroSwiss and BM…