-
## Platform
I’m using:
* gokrazy/rpi3b
* gokrazy/rpi3b+
* gokrazy/rpi4b
* ... and also gokrazy/rpi400
## Observed behavior
The Raspberry Pi 400 seems to mostly work. Everything except w…
-
On a mainline kernel (5.10) using an rpi4, the i2c address ends up being i2c-3 and not i2c-0 or i2c-1. This causes errors like `Invalid slave address: 117` or `Invalid slave address: 50` - I did a cl…
steev updated
3 years ago
-
First off, I love what you have created here. Thank you for the time you've spent and for sharing! I followed all the steps as laid out in the readme. I did have to edit Interface.py and Proxmark3.py …
-
Hi James,
Im really struggling with one last bit. When i launch the rur_navigation package on my remote workstation i get two errors "no transform from Laser to Map and no transform from Base_link …
-
I got a raspberry pi with the Raspbian Jessie Lite distro installed.
I then followed the steps on https://www.dartlang.org/install/linux:
``` bash
# Enable HTTPS for apt.
$ sudo apt-get update
$ sudo…
Hixie updated
1 month ago
-
On an RPi4
I am using Raspbian
I am using bootloader:
Mar 4 2020 14:24:08
version a445ea4fa94708c89875dbbb7a0b19e72987cbb2 (release)
timestamp 1583331848
Linux retropie 4.19.66-v7l+ #12…
-
Thanks for the repo @rahul-thakoor However, in my case the camera is still not being detected. Do you have any idea what might be the issue? I'm using RPi 4 with balenaOS 2.94.4|supervisor 12.11.36…
-
Hello Scott,
I installed your magnificent instrument-panel on my windows computer.
It works very well with MS2020, so i can expand building my cockpit in a very beautiful and exciting way.
But…
-
As in the below screenshot, the Software Update Check system fails on Raspbian. I've had motionEye installed on my Raspberry Pi 3B for a while and completely didn't think about checking for updates, I…
-
i2cdetect -y shows phantom devices at all addresses.
The upstream version of the driver at https://github.com/allanbian1017/i2c-ch341-usb has a patch which attempts to do a status check before ev…