-
```
How can this work if the phone number sent to SIM900 in the next format:
[code]
ATD
+420123456789
;
[/code]
???
Fix in call.cpp
void CallGSM::Call(char *number_string)
{
if (CLS_FREE != gsm.…
-
```
What steps will reproduce the problem?
I am using the code of the GSM_GPRSLibrarySMS. The called function is:
gsm.readSMS(smsbuffer, 160, n, 20)
One function call will need exactly 10s which caus…
-
```
Good evening
The library is use with Arduino Mini Pro 5V and SIM900, and later 3.3V and
SIM908
Actually _cell is using pin 2 and 3 [SoftwareSerial _cell(2,3)]
This work fine, but if want to ad…
-
```
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
Should allow the sketch to define pins used to communicate with SoftwareSerial
library.
Mus…
-
```
What steps will reproduce the problem?
1. Upload GSM_GPRSLibrary_SMS.ino and change the phone number together with the
country code
2. Change the TxRx pins on my shield to pin 2&3 which stated in…
-
```
Hello guys.
I've been working on an interfacing system of GSM Shield SM5100-B with Arduino
UNO Rev 3. and a keypad and an LCD.
when I used the example to send an SMS from the Arduino staticall…
-
```
Hi All,
I am trying to make work the IComSat v1.1 SIM900 GSM / GPRS shield with the
Arduino Uno using this library but cannot get it work.
I have de-commented these two lines
#define _GSM_TXPIN…
-
```
I'm using Arduino Mega 2560 with IComSat GSM shield.
I've already trim the pins 1 and 2 of the shield(the ones below arduino's pin 1
and 0) so I must use these ones :p
The codes of the library on…
-
```
1. On Arduino 1.0.4, open the Library_Client example the is distributed with
the package.
2. Configure the service provider GPRS details.
3. Upload the sketch to Arduino Duemilanove and watch the…
-
```
What steps will reproduce the problem?
1. Upload GSM_GPRSLibrary_SMS.ino
2.
3.
What is the expected output? What do you see instead?
I was expecting the equivalent of
AT+CMGL="ALL"
But in the l…