-
I've tried developing against the XBee on both Linux and Mac; it used to be the XBee Mac dev (in 2014/2015) was fairly straight-forward and easy to support ... maybe even easier than Linux dev. This d…
-
```
Greetings,
I am working on setting up a ZigBee SE experiment. So far I have been able to
successfully implement the Link Key establishment mechanism to include the
validation of an Installation…
-
```
Greetings,
I am working on setting up a ZigBee SE experiment. So far I have been able to
successfully implement the Link Key establishment mechanism to include the
validation of an Installation…
-
```
What steps will reproduce the problem?
1. Trying to issue an 'ND' command (API mode) and later parsing it (the problem
is in the parsing).
For example:
xbee.send("at", frame='A', command='N…
-
Error opening socket: hostname 'my.idigi.com' doesn't match u'EDP Device Certificate'
XIG Windows 1.4.2 (or 1.4.1)
XBee S1
Windows 7
This has always worked in the past - now I getting the above erro…
-
I had your excellent library working just fine a while back. Then, for whatever reason, it stopped working and I'm totally at loss as to what might be my issue. Been googling for days now but unable t…
-
```
What steps will reproduce the problem?
1. Receiving a 64-bit addressed I/O sample from a Series 1 XBee,
configured with digital channels 0-2 set to digital in, channel 2 set to
analog in, and ch…
-
Hi,
I tested your code without the section of Xbee and serialports. However, the effects of test are not good.
How far is the distance between two cameras? Is it the same as the IPD? Could you please …
-
On pourrait se passer de la platine WiFly qui ne sert en fait à rien (http://www.lextronic.fr/P1901-platine-dinterface-pour-modules-xbee.html) à part passer en 2.54
Pour cela il faudrait des rangées …
-
It seems like the xsens 700 must be first manually set up to output data in correct frame (NED or NWU?), otherwise the driver will output the data in the wrong coordinate system.
Would be good if the …
flixr updated
6 years ago