-
Yesterday I updated to the latest version V2_05_66. Since then, my two Osram Smart+ Plugs no longer work correctly. A timeout occurs when switching via the on/off cluster. That goes so far that the de…
-
Im trying a simple deepsleep sketch to use it in one of my projects but when the deepsleep ends, the led flashes once and nothing happens. how can i fix this?
it sleeps because it doesnt print the …
-
Thank you for your work.
I bought these on Banggood - [GS-WDS07 Wireless Door Magnetic Strip 433MHz](https://www.banggood.com/GS-WDS07-Wireless-Door-Magnetic-Strip-433MHz-for-Security-Alarm-Home-Syst…
-
finally received the new boards and got everything installed/ setup. being a ham radio operator I opted for the 433 boards but notice they do not talk to one another when setup and codes are shared fo…
-
I have a Viking AB sensor 02038, very similar to this one https://www.lohelectronics.se/hemautomation/433mhz/sensorer-1110/tradlos-temp-luftfukt-for-inne-utomhusbruk
It's identified as Fineoffset-W…
-
Hi again Ricardo
I am getting an ususually high amount of packet corruption on my igate GW4BVE-10. An extract from the syslog file is attached. Some of the corrupted position reports are actual…
-
我的设备是e900v22c,刷的版本是19.5 rc3。播放的文件在NAS上,通过NFS协议访问。
卡顿的现象是: 播放NAS的其他文件没有问题,但是播放那种带Index (原盘?) 的电影就会卡顿。切换成有线后就流畅了。U盘或者mmc 都是一样的状况。
AP上面显示无线连接速率是433Mhz,貌似不像是因为网络速度上限导致的。因为播放一些高码率的电影,用有线的话 大部分时间流畅,偶尔…
-
Hey, interesting project - thanks for sharing.
In order to use it over here in the EU we would need this to run on 868MHz, which I assume would not be a big deal. How about LBT - did you consider imp…
-
Cheeky request - It would be great if there was an option to show when a 433mhz signal is received or sent (as with traditional Somfy remotes) via a hardware led. Could a spare pin/pins be added as de…
-
Hello,
Although I think I set up everything according to the readme (with menuconfig), I don't receive any signals.
In the terminal log it looks like the CS pin is not defined ocrrectly:
GPIO[5]|…