-
Some issues with the wifi.beginAP() command:
### Default Espressif AP showing up
Using Wifi Firmware 1.1.0 and WiFi NINA library 1.4.0, the hotspot is created ignoring my config (ssid,pass), and bei…
-
When using MKRGSM.h in combination with RTClib.h the compiler throws an error because of a redeclaration of the constant 'OFF'.
The original code in RTClib.h is:
`enum Ds1307SqwPinMode { OFF = 0…
-
**Board description (please complete the following information):**
- Name: Sharky MKR
- Link to all relevant information:
* Documentation attached below (User and Programmer's Guide DRAFT)…
-
Hello All,
Looking at older posts - I can't seem to be able to enable the AT commands under the new tools using idy.py menuconfig. I can't find the AT command menu like others have shown in their …
-
I am using an MKR WAN 1300 board.
According to the reference: https://www.arduino.cc/reference/en/language/functions/analog-io/analogwrite/
> After a call to analogWrite(), the pin will generate a…
-
Hello,
Please will someone add this function for the (was ONE, now corrected) Zero and DUE boards?
'dtostrf' was not declared in this scope
Thank you,
Dave
void loop() {
// put your main code here, …
ad5jo updated
4 years ago
-
While trying to compile the UpdateBootloader code for the MKR 1500 (from File>Examples>Examples for Arduino MKR NB 1500>SAMD_BootloaderUpdater>UpdateBootloader), I get the following error:
```
C:\…
-
Please add Arduino MKR Vidor 4000 board.
-
Hello,
I am trying to get my MKR Zero OTA ready, the Ethernet Shield is working I can ping it.
I took the example code and changed it to a static IP.
I cannot see the MKR with a Bonjour Viewer …
-
Is there any way to change the PWM resolution / range for analogWrite? The STM32s are capable of 16bit PWM but I didn't find any information of how to change that in Arduino IDE.
If there is an exam…