-
I am having an issue with an RPi Pico board. I have installed the latest Arduino IDE 2.0.3, the Latest Arduino-pico core 2.7.1
The issue is I am not able to see a COM port on the Tools menu when I pr…
-
Hello,
I just resolved a problem with an i2c device but I don't understand why my initial code did not work.
Sorry in advance if this is the expeded behavior or if this is not linked to arduino-p…
-
**Carefully written Issues are more likely to be given priority.**
**丁寧に記述された報告は優先して対応される可能性が高くなります。**
## Environment ( 実行環境 )
- MCU or Board name: RPi2040
- Panel Driver IC: GC9A01
- Bus…
-
I have a mini serial command processor and sending a '*' causes rp2040.reboot() to be called.
However, when restarting, the startup messages are not always printed to the IDE serial terminal. e.g. …
-
I am trying to figure out the minimal setup to build a sketch with cmake. In the readme, the only mention of building with cmake goes to a two year old Toms Hardware article, and the people in the com…
-
After following the "Getting started with Raspberry Pi Pico" and following Appendix A, I still can't manage to debug the samples to test the the debugger.
Currently I'm getting these errors.
…
-
When running the master branch when I load the program after attach to the first target (mon s shows 3 targets so basic comms works) it hangs on:
```
Reading symbols from blink.elf...
(gdb) tar e…
-
Hi!
I'm having some trouble compiling my code after adding this library.
Most likely I'm doing something dumb, but would appreciate any input.
I include and initialise it like this:
```
#includ…
-
> Changling spi0 to spi1 in the TFT_eSPI.cpp and Processors/TFT_eSPI_RP2040.h and Processors/TFT_eSPI_RP2040.c should work.
>
> LEt me know how you get on and it can be made a configu…
-
**Describe the bug**
The VSCode extension (running an RPI Pico SDK program) runs at around 1% of realtime speed and the highest I've ever seen is 6% briefly and never again.
**To Reproduce**
This…