-
**Microcontrollers** are capable of detecting binary signals: is the button pressed or not? These are digital signals. When a microcontroller is powered from five volts, it understands zero volts (0V)…
-
I went to the wiki to setup esp8266 and it errors.
Arduino: 1.8.11 (Windows 10), Board: "LOLIN(WEMOS) D1 R2 & mini, 160 MHz, Flash, Legacy (new can return nullptr), All SSL ciphers (most compatible…
-
Hello,
rhomb.io have developed a LIS2HH12 library to run this accelerometer
Please, could you add the https://gitlab.com/rhombio/rhio-LIS2HH12 to the Library Manager?
Thanks
-
Using Arduino IDE 1.6.10/Arduino AVR Boards 1.6.12 with Windows 7 64 and 32 bit
1. Select **Tools > Board > Uno** from the Arduino IDE menus.
2. Select **Tools > Programmer > AVRISP mkII** from th…
-
...but Zero/MKR1000 have USBHost capabilities, haven't they?
-
```
including stdlib.h from a library blows up with a
/avr/include/stdlib.h:111: error: expected unqualified-id before 'int'
This is because wiring.h tries to define abs() itself. Wiring.h tries …
-
```
including stdlib.h from a library blows up with a
/avr/include/stdlib.h:111: error: expected unqualified-id before 'int'
This is because wiring.h tries to define abs() itself. Wiring.h tries …
-
```
including stdlib.h from a library blows up with a
/avr/include/stdlib.h:111: error: expected unqualified-id before 'int'
This is because wiring.h tries to define abs() itself. Wiring.h tries …
-
```
Arduino 1.5.7 / avr-gcc 4.8.1 reports multiple:
error: variable ... must be const in order to be put into read-only section by
means of ‘__attribute__((progmem))’
The fix is to make the variabl…
-
```
Arduino 1.5.7 / avr-gcc 4.8.1 reports multiple:
error: variable ... must be const in order to be put into read-only section by
means of ‘__attribute__((progmem))’
The fix is to make the variabl…