-
The error log is extensive, but it simply complains about _BV being out of scope. This can be reproduced by compiling Marling on branch bugfix-2.0.x (I haven't tried the 1.1 branch)
#######
**Wor…
dc740 updated
2 years ago
-
Hi,
if I use this code on StandardFirmataPlus, the firmata works on the begin but then it stop when I send Firmata.digitalwrite from my client program.
Code into StandardFirmataPlus:
void …
-
AttachInterrupt() is not in the supported list, but pin interrupt is supported by the chip itself.
Is it possible to add it?
-
Please take a look if the AI can support new level caps of the homun S mainly.
https://forums.warpportal.com/index.php?/topic/226517-kro-job-class-improvement-project-homunculus/
-
```
Used the below code on both attiny85 and attiny45, attiny85 gives the correct
sound as pwm output on speaker pin. But the same code on attiny45 gives just
"tip..tip..tip" sound on speaker. Tried…
-
I'm currently working on a project that requires multiple receivers (at 433MHz and 315MHz). I've read through past issues regarding this (#25 and #63), and I have a proposal for (sort of) resolving th…
-
```
Used the below code on both attiny85 and attiny45, attiny85 gives the correct
sound as pwm output on speaker pin. But the same code on attiny45 gives just
"tip..tip..tip" sound on speaker. Tried…
-
```
Used the below code on both attiny85 and attiny45, attiny85 gives the correct
sound as pwm output on speaker pin. But the same code on attiny45 gives just
"tip..tip..tip" sound on speaker. Tried…
-
```
Used the below code on both attiny85 and attiny45, attiny85 gives the correct
sound as pwm output on speaker pin. But the same code on attiny45 gives just
"tip..tip..tip" sound on speaker. Tried…
-
it seems SoftwareBitBang/Timing.h does not have any settings for atmega328 and F_CPU == 8000000L and thus does not compile. would copying the attiny85 values do the trick, and is there a guide for wh…