-
Basicly I have some ATTiny 412 chips. When I program it by UPDI, it shows the following error:
```
pymcuprog.serialupdi.application - INFO - Device ID from pyupdi = '1E9221' rev 'B'
pymcuprog.nvm -…
-
Yesterday, I decided to upgrade my printer with dual Y drives. I grabbed the latest Development branch and made the following changes to match my printer.
**Configuration.h**
``` cpp
#define STRING_…
-
This is a TODO item to add support for zero-CPU clockless on AVR.
Example Target: Arduino Nano Every (ATMega 4809)
The goal is not parallel-output support, but rather reducing CPU usage on less ex…
-
Perhaps this is more a question than an issue, but I did not know of any other way to contact you.
I noted that if I upload _standard_ Optiboot to my ATmega328P using **Arduino AVR Boards** / **Ard…
-
### Bug Description
Using Marlin 1.1.9-bugfix on an Ender 3 Pro with Creality 1.1.5 board.
Created GCODE for calibrating Linear Advance 1.5 using http://marlinfw.org/tools/lin_advance/k-factor.htm…
-
Fri 09 Jan 2009 05:05:52 AM CET
The EEPROM funtions are not the best yet:
* The multibyte reading is very slow.
* The space expense is large: inlined byte functions are include
into each source file,…
-
#692 discussed this a little, but I've begun to implement something using Midi's SysEx protocol, and would like to get some feedback on it before it gets too many eyeballs. Because it'll be supported …
-
Mon 20 Jun 2011 06:19:17 PM UTC
It came to my attention that I could only upload every 2nd try to my bootloaded AVR chip (or 'Arduino' if you like). The first pass would fail and I would abort avrdud…
-
Deae Bluebie,
Any reason to don't used a HID interface?
I cannot install a driver in the machine and I would like to use your bootloader using a HID interface.
Can you suggest to me some advices t…
-
Hello,
do you know anything about PlatformIO? Somehow there is still one setting wrong.
I can compile and transfer a blinksketch but the led does not blink. What is wrong?
This is an AVR128DB…