-
@OpenUAS , @EwoudSmeur and I are trying to make the Dshot Protocol work on Ewoud's Cyclone hybrid MAV which mounts the Chimera board with the code created by @alex31 and maintained by @gautierhattenbe…
-
- [x] Create manifest (https://github.com/Halium/halium-devices/pull/35)
- [x] Boot image and system image build successfully
- [x] Device boots into rootfs, `usb: Manufacturer: GNU/Linux Device` ap…
-
### Describe the bug
From @crteensy:
Upgraded BF on an old Mamba F405 FC (FURYF4OSD). It showed ESC telemetry before, but now I get 100% error rate in the motors tab. This ESC reported back via DS…
-
### Describe the bug
when first plug in, the quad will boot up but then it will boot up second time (as you can see from the video). If it only boots up once, then it won't arm. I will then have to…
-
After installing `libgpiod-dev` on ubuntu 20.04 (long-term-support until April 2030), cmake enabling LINUXGPIO fails to build: `gpiod_line_set_direction_input()` is missing in `libgpiod`. @mhei @mcuee…
-
### Describe the bug
If rx protocol SPEKTRUM is selected in Firmware Flasher for 4.5.0 RC3 I get the following compile error
`In file included from ./src/main/pg/rx.c:29:
./src/main/pg/rx.c: In f…
-
### Issue Description
I have a tricky problem now. My main controller is stm32f401, and the RGB uses ws2812. After the keyboard is powered on, the first RGB is always different from the other RGB col…
-
Sending the below request:
```
POST /api/v1/build HTTP/1.1
Content-Length: 2666
Content-Type: application/json
Host: sysupgrade.openwrt.org
User-Agent: HTTPie
{
"profile": "xiaomi,ax9000"…
-
The spi driver on allwinner based boards seems to not play nice and I'd like to just bypass it for verification, that would mean requiring generic support for software defined buses. This could be reu…
-
Over the years, many Qubes users on the mailing lists have expressed the desire to be able to run some kind of Android VM (e.g., HVM) under Qubes OS.