-
```
What is the expected output? What do you see instead?
If two or more FTDI cables (usb to ttl) are connected to PC usb ports and OHM
is not already running, then OHM will crash immidietly on star…
-
```
What is the expected output? What do you see instead?
If two or more FTDI cables (usb to ttl) are connected to PC usb ports and OHM
is not already running, then OHM will crash immidietly on star…
-
```
What is the expected output? What do you see instead?
If two or more FTDI cables (usb to ttl) are connected to PC usb ports and OHM
is not already running, then OHM will crash immidietly on star…
-
```
What is the expected output? What do you see instead?
If two or more FTDI cables (usb to ttl) are connected to PC usb ports and OHM
is not already running, then OHM will crash immidietly on star…
-
Thanks for your excellent work on open source data loggers. It jump started my very similar project.
However, when I uploaded this code on my Arduino Nano, with a near identical setup to this tutor…
-
I just read the article about your GPSDO monitoring thing, and you mention several times that a reciprocal frequency counter is complex or expensive.
I do not agree with this. A reciprocal frequenc…
-
Hi, this project is great! I appreciate your efforts and I love retro workstations.
However, soldering the RP2040 and the BGA HyperRAM is challenging.
Is it possible to use one or more 8-pin 3.3V …
-
## Current Behaviour
In schematic view the wires are not drawn correctly if a parted is moved. It seems that the are not connected anymore but it is still fine. Only the wires drawn on the monitor ar…
-
Updating of the channels doesn't work. The API does work with the modes, but not with the channels. I have a RGBWW strip, which should be compatable. Also tried the other lines.
![image](https://us…
-
I am using the Arduino 1.8.9 IDE on a ATTiny85 clone with a BME380. 10K pullups are on the I2C lines. An external battery assures that 5v is adequate.
I can compile properly. I can serial print …