-
I use this setup:
* Bresser 5-in-1 weather station,
* CC1101 868MHz receiver
* Wemos D1 mini µC.
The received readings from the 5-in-1 sensor are confirmed by the base station. The SW worked…
-
Hi.
After update to version 2.X there is no sign of devices' telegrams.
Below is log from version 1.5.1 of wmbus
[21:45:48][I][app:102]: ESPHome version 2023.4.4 compiled on May 9 2023, 16:25:…
-
**Describe the bug**
Speed setting accepts values between 0 and 254.
When set to 254, Ventilation setpoint (%) stays at 99%, not 100%.
Could this be an indication that acceptable values should be…
-
## Describe the bug
Trying to compile RF Quack for EvilCrowRF v1
Getting the below error
```
src/radio/RFQCC1101.h: In member function 'virtual int16_t RFQCC1101::getSyncWord(uint8_t*, pb_size_t…
-
Since the commit to reduce SPI delays ( https://github.com/Rodemfr/MicronetToNMEA/pull/48 ) , the Micronet network is no longer detected on my system. Rolling back to the previous commit fixes the iss…
-
I finally received my parts today and am ready to start adding support for this chipset
For parts I have received the 433Mhz and 868Mhz modules https://heltec.org/project/wifi-lora-32/
![IMG_619…
-
I used lower SPI clock in freq_tracking branch 2MHz. With that no delays are needed in CC1101 operation.
Checked this with 3.6 and 4.1 board. In my opinion something is wrong in their 4.x SPI driver.…
-
### Description of the feature you're suggesting.
- In Frequency analyzer add the following options:
1. Ability to change sensitivity
2. Show last X amount of captures
3. Ability to log the signa…
-
Hi kripthor. I clone your repository and try to compile, but there are some errors.
e.g. cannot open source file "esp_deep_sleep.h"
Can you help me, please? Thanks a lot!
Julio
* Execu…
-
I settled my setup for scope and rf transmission (rtlsdr) measurements. I a first view I see very compact transmission chunks with large gaps between.
Do you have an idea which time - signal constell…