-
```
What steps will reproduce the problem?
1.
Run it with any baud rate above 19200. Use it with > 8 coil or digital
registers.
2.
Inter-message timing calculation is not right for all baud rates, r…
-
```
What steps will reproduce the problem?
1.
Run it with any baud rate above 19200. Use it with > 8 coil or digital
registers.
2.
Inter-message timing calculation is not right for all baud rates, r…
-
```
What steps will reproduce the problem?
1.
Run it with any baud rate above 19200. Use it with > 8 coil or digital
registers.
2.
Inter-message timing calculation is not right for all baud rates, r…
-
```
What steps will reproduce the problem?
1.
Run it with any baud rate above 19200. Use it with > 8 coil or digital
registers.
2.
Inter-message timing calculation is not right for all baud rates, r…
-
```
What steps will reproduce the problem?
1. Receiving a 64-bit addressed I/O sample from a Series 1 XBee,
configured with digital channels 0-2 set to digital in, channel 2 set to
analog in, and ch…
-
```
What steps will reproduce the problem?
1.Trying to read some analog valeu with the getAnalog() function
What is the expected output? What do you see instead?
The output that appears is like this …
-
Help in finalizing the [vocabulary](https://github.com/jasonclark/linked-people-bioscience/blob/master/ontology.rdf) for describing the researchers and their work. Note: You don't need to be Semantic …
-
Our implementation of the Pi-Juice requires that it is enclosed in a case. We are using the Smarti Pi Touch Pro Case. We are using the Pi-Juice with a Raspberry pi 4 and 7inch Display.
After a few …
-
[2023-03-15 09:43:49] Attempting to connect to the internet and synchronize RTC with NIST
[2023-03-15 09:43:49] This may take up to two minutes!
[2023-03-15 09:43:50]
[2023-03-15 09:43:50] Waiting…
-
Hallo
Ich habe an meinem Raspberry eine 7.1 USB Soundbox angeschlossen.
Der OMXPLayer gibt aber nur Sound 2.0 aus .
Was kann ich tun damit ich 5.1 Sound bekomme ?